Silicone Heater Plate for Control Cabinets SSM

27-02..-....

Features

  • Space saving thanks to its flat structure
  • Good and uniform heat distribution thanks to the uniplanar structure
  • Random mounting position
  • Excellent resistance to chemicals

Guidelines/Norms

VDE certificate: License no. 101109
Norms: EN 60335

Ambient temperature

-60 °C up to +80 °C (Type 27-0222)
Plate temperature:
+70 °C (pre-set value)
adjustable from +30 °C to +150 °C

Certification

VDE 101109
GOST R POCC DE.ME92.B01898

Description

The SSM heater plate can be used for frost protection and as an anti-condensation heater. Its application ensures complete operational safety as the plates prevent malfunctions often due to leakage currents on electrical installations or the corrosion of metal components. Typical applications are switchgear and controlgear cabinets, instrument housings, analyser cases, glove boxes and other enclosures.

Structure

The heater plate consists of a thin, anodised aluminium baseplate, vulcanised with siliconeimpregnated glass-fibre mats with an embedded heating coil. A bimetallic switch integrated in the terminal block limits the surface temperature of the heater approx. +70 °C. An alternative version is available for adjusting the surface temperature from +30 °C up to +150 °C.


Technical data *

Protection class Type 27-0212-.. IP 53
Type 27-0222-.. IP 51
Dimensions see data sheet
Material baseplate aluminium sheet, anodised 1.0 or 1.5 mm thick
Insulation silicone rubber approx. 1.5 mm thick
heating element CrNi or constantan wire
Installation – with 4 x M4 screws
– with a special glue
– with mounting rails
Heat output 40 W, 100 W or 250 W
Voltage AC 230 V/50 Hz
Connection supply cable of silicone 2 x 0.75 mm², 0.5 m long

*Refer to the documentation for more detailed information


Documentation

Data Sheet - Silicone Heater Plate for Control Cabinets SSM

Меню