DPC CodeKey Programming key for DPC III and DPCfront

05-0089-007.

Features

  • Easy programming of DPC devices
  • Operation independent of voltage supply
  • SMART converter function USB/RS485

Ambient temperature

0 °C to +50 °C

Certification

TC RU C-DE.ML03.B.00063

Description

The DPC CodeKey makes it easier to set parameters for the DPC device family. Once a reference device has been successfully programmed, the operating parameters are available in a device-memory readout. The parameters filed in the CodeKey can be copied into other devices any number of times. This reduces the programming work to a minimum. In addition, the CodeKey can be used as an interface converter between the USB and RS485.

Mode of Operation

A DIP switch can be used to select the device function required. The DPCfront and DPC III have at the side or under the display cover a 5-pin interface into which the CodeKey is inserted. The transmission is started at the press of a button. Once done, a status LED flashes. Voltage is supplied to the CodeKey through the interface.


Technical data *

Storage temperature -20 °C to +70 °
Humidity 20 % to 80 % relative humidity
Interface RS 485:
not insulated, Phoenix MC 1.5/3-G-3.5, 3 m max. cable length
Baud rate: 1200 to 38400 baud
TTL:
not insulated, JST S 5B-PH-KL – 2 mm, 3 m max. cable length
baud rate: 1200 to 38400 baud
Voltage Voltage supply (external, optional)
DC 9 V to 12 V via 1.3 mm jack

*Refer to the documentation for more detailed information


Documentation

Data Sheet - DPC CodeKey Programming key for DPC III and DPCfront

Меню