Heat shrink technology for PSBL, PSB and HSB systems

Features

• Direct insertion of a heating cable into an Ex e junction box enclosure
• Space-saving, favourable dimensions
• Flexible connection-heating cable/cold cable

Marking

PSBL:
 II 2G Ex e IIC T5 Gb
 II 2D Ex tb IIIC T95 °C Db
PSB:
 II 2G Ex e IIC T5, T6 Gb
 II 2D Ex tb IIIC T95 °C, T80 °C Db
MSB:
 II 2G Ex e IIC 150 °C (T3), T4 Gb
 II 2D Ex tb IIIC T150 °C, T130 °C Db
HSB:
 II 2G Ex e IIC 200 °C (T2), T3, T4 Gb
 II 2D Ex tb IIIC T200 °C, T195 °C, T130 °C Db

Ambient temperature

-40 °C up to +55 °C
Max. operating temperature end cap: +85 °C

Description

The heat shrink method is a tried and tested technology for connecting heating tapes to the supply voltage or to other heating tapes. In the explosion protected area it is possible using the heat shrink method to insert the heating tapes into our junction box.

In the media protection area, it is also possible to connect the heating tape to the supply voltage or to connect two heating tapes directly to each other. This is done using the butt connectors contained in the set.

The end termination is also realised in all sets using heat shrink sleeves.

Technical data *

*Refer to the documentation for more detailed information