Position switch Aluminium



  • Dimensions and mounting dimensions according to DIN EN 50041
  • Compatible with non-Ex DIN limit switches
  • Different switching elements


Ex II 2G Ex d IIC T6 Gb
Ex II 2D Ex tD A21 IP 66 T80 °C
Ex d IIC T6 Gb

Ambient temperature

T6 to max. +75 °C
depending on the rated current
Operating temperature: -50 °C to +100 °C
depending on the model and the materials used


EPS 14 ATEX 1 766 X
IECEx EPS 14.0092X
PTB 00 ATEX 1093 X
IECEx PTB 07.0045X


All dimensions and actuating elements of the Ex d position switch correspond to the DIN EN 50041 standard.

Its 30 x 60 mm mounting dimensions make the switch directly compatible to the position switch corresponding to the same DIN standard. The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection cable Type 07-2511 is mounted as switching element.

Different actuators are available for the variety of actuating possibilities. After the removal of four screws these knobs can be rotated by 90 °C allowing so four different directions of actuation. Gold-plated or gold-nickel contacts are available for the switching of low currents of voltages.

Standard length of the connection cables are 3 m. BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the position switch within the Ex area.

Technical data *

Protection class IP 66 (IEC 60529)
Dimensions see data sheet
Material Enclosure material: aluminium
Mechanical life max. 106 switching cycles depending on plunger operating speed and angle
Voltage see data sheet
Current see data sheet
Connection Lead 0.75 mm2 HO5VV-F/A05VV-F/BETAflam®
other cores and leads on request

*Refer to the documentation for more detailed information


Data Sheet - Position switch Aluminium

Declaration of Conformity 01-2910-7C0001

Operating Instructions - Position Switch Type 07-2911…./….