Signal- and obstruction light for incancescent or xenon lamps AWL…

Marking

ATEX:
  II 2G Ex d IIC T6/T4 Gb
  II 2D Ex tb IIIC T85°C/T135°C Db IP66
IECEx:
Ex d IIC T6/T4 Gb
Ex tb IIIC T85°C/T135°C Db IP66

Ambient temperature

ATEX & IECEx & INMETRO: -60°C to +60°C
TR-CU: -60°C to +60°C
(depending on the design)

Description

The Type AWL light series has been designed for potentially explosive atmospheres in Zones 1, 2 as well as 21 and 22, and is characterised by its robust design, a high IP protection type and a large ambient temperature range. It is used for all types of obstruction lights, such as those on large buildings, masts, cranes, wind turbines, towers, chimneys or front position / aviation obstruction lamps for targeting traffic management in the area of airports. Identifying very high buildings, telecommunication towers, factory chimneys, masts etc. is essential in and around airports and as from a stipulated height. Especially at night, dusk and when there is poor visibility, they help the pilot by clearly and unmistakably highlighting obstacles, and therefore aid air-traffic control. Also in the offshore area, as signal and orientation lighting of obstacles such as platforms, buoys, bridges etc., they offer ideal solutions for safe shipping navigation.

The light is designed with type of protection “Ex d” and may be used with incandescent light bulbs, xenon lamps or high performance LED modules. A large number of obstruction light solutions are offered as “Low Intensity Obstruction Lights” or “Medium Intensity Obstruction Lights”. According to requirements, the lights are available with steady burning or with horizontal or vertical flashing light beam. The portfolio is rounded off by complex systems, including their control and monitoring, for the potentially explosive atmosphere and for the onshore and offshore area.