https://www.bartec.de/ProdCatalogue/Assets/Datasheets/lng_0/CR_Lighting_E.pdf

EVO…/EVT…/TLF…


Marking

EVO
ATEX:
Ex  II 2G Ex d IIC T6/T5/T3 Gb
Ex II 2D Ex tb IIIC T85°C/T100°C/T200°C Db IP66
IECEx:
Ex d IIC T6/T5/T3 Gb
Ex tb IIIC T85°C/T100°C/T200°C Db IP66
EVT
ATEX:
Ex II 2G Ex d IIC T6/T4/T3 Gb
Ex  II 2D Ex tb IIIC T85°C/T135°C/T150°C Db IP66
IECEx:
Ex d IIC T6/T4/T3 Gb
Ex tb IIIC T85°C/T135°C/T150°C Db IP66
TLF
ATEX :
Ex II 2G Ex d IIB T3 or Ex de IIB T3
Ex II 2D Ex tD A21 T200°C IP65

Ambient temperature

ATEX & IECEx & INMETRO: -60°C to +60°C
TR-CU: -60°C to +60°C
(depending on the design)

Certification

INERIS 01ATEX0039 X
INERIS 01ATEX0040
INERIS 01ATEX0026
IECEx INE 12.0018X
IECEx INE 12.0027X
CEPEL 12.2157
CEPEL 12.2155
TC RU C-IT.GB08.B.01342

Description

The Type EVO / EVT / TLF wall and ceiling light fitting for potentially explosive atmospheres in Zones 1, 2 as well as 21 and 22 is characterised by its robust design, a high IP protection type and a large ambient temperature range. This light is suitable for use wherever the hardest ambient conditions are to be found, such as in oil and gas production and in the chemicals industry. It offers the ideal solution for illumination both outside and inside industrial installations, for lighting up tunnels, walkways, corridors and storage areas, and for use in areas where space is very restricted.

The light is designed with type of protection “Ex d” and may be used with ordinary incandescent / halogen / and LED lamps with E-27 base. For the electrical connection, two ¾” NPT threaded holes are provided on the light to house the cable glands or blanking plugs, approved for the explosion protected area. Two M6 holes are provided for mounting, and the corresponding mounting brackets are available as accessories on request.


Documentation

Data Sheet - Wall-/ceiling light for incandescent-, halogen- or LED lamps EVO.../EVT.../TLF...

Customer requirements - Lighting

Меню