Plug-and-socket device for Zone 1 + 2 and for Zone 21 + 22

Low stock!



Ex II 2G und II 2D Ex de IIC T6
Ex Ex tD A21 IP 66/IP 67 T80 °C
Ex de IIC T6
Ex tD A21 IP 66/IP 67 T80 °C

Ambient temperature

-40 °C up to +40 °C (on request to +60 °C)


LCIE 99 ATEX 6027 X
LCIE 05 ATEX 6149
LCIE 05 ATEX 6150
IECEx LCI 09.0005X
IECEx LCI 09.0006
IECEx LCI 09.0007
PPC 00-044211


BARTEC’s plug-and-socket devices for areas in which an explosion hazard exists are particularly well-suited for use in raw atmospheres because of their high degree of IP protection and their resistance to chemicals. Their integrated switch function gives them the ability to switch overloads as per IEC/EN 60947-3 Cat. AC 22 or AC 23.Silver-plated butting contacts ensure a constant contact pressure with low transfer resistances.

The modular design of the plug-and-socket system allows both plugs and couplers to be supplied. They are supplied in unmounted state.

Wall socket:
BARTEC supplies both a fully certified wall socket and a socket with a 30° adapter to flange onto housings.

Plug-and-socket devices from BARTEC are approved in accordance with the European directives not only for Zone 1 and 2, but also for Zone 21 and 22. Likewise for Class I Div. 2 Groups A, B, C, D and Class II Div. 2, Groups E, F, H in accordance with the American standards.

Technical data *

Protection class IP 66/IP 67 (EN 60529)
Dimensions see data sheet
Voltage 440 V (see data sheet)
Current 16 A, 20 A, 32 A, 60 A (see data sheet)

*Refer to the documentation for more detailed information


Data Sheet - Plug-and-socket device for Zone 1 + 2 and for Zone 21 + 22

Declaration of Conformity 07-81. DXN

Plug-and Socket Device Type 07-810.-….