Ex d/e Gland

Non-armoured, Single compression

07-9430-4…

Features

  • Specially designed for Non-armoured cables
  • Single compression: on the cable (inner sealing)
  • Easy assembly

Marking

ATEX:
Ex II 2GD Ex db IIC Gb
Ex II 2GD Ex eb IIC Gb
Ex II 2GD Ex tb IIIC Db
IECEx:
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db
Suitable for use in:
Group II, Gas Group IIC, Zone 1/Zone 2
Group III, Dust Group IIIC, Zone 21/Zone 22
Equipment Marking :
Ex II 2GD
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db

Certification

CESI 18 ATEX 039 X
IECEx CES 18.0041X

Description

The Cable Gland Type 07-9430-41 are suitable for inserting circular cables into Ex db enclosures with threaded entries and Ex eb or Ex tb enclosures having either threaded or plane entries. They are suitable for use in Zone 1, 2 for gas groups IIA, IIB and IIC and for use in Zone 21 and 22 for dust groups IIIA, IIIB and IIIC. The glands are fastened to the enclosure via the external thread section on the gland outer body. An elastomeric inner sealing ring is used in each gland type to facilitate sealing between the cable and the gland body and to clamp the cable so that no tensile or torsional forces are transmitted to the conductor connections. IP66/68 protection (50 m for 30 minutes) is maintained when the glands are installed according to the operating instructions.


Technical data *

Protection class IP 68 – 5 bar, 30 min, IP 66
Material Body, Cap/Inner Part:
Brass nickel plated, stainless steel,
Seal/O-ring:
CR (Chloroprene), Silicone
Temperature range Seal Material CR (Chloroprene):
-40 °C to +100 °C
Seal Material Silicone:
-60 °C to +130 °C

*Refer to the documentation for more detailed information


Documentation

Data Sheet - Ex d/e Gland

Operating Instructions - Universal Ex d/e Gland

Меню