Ex d/e Gland for Mining

Non-armoured , Single compression



  • Non-armoured cable glands for mining application
  • Single compression: on the cable (inner sealing)
  • Easy assembly


Ex I M2 Ex db I Mb
Ex I M2 Ex db eb I Mb
Ex db I Mb
Ex db eb I Mb
Suitable for use in:
Group I, Mining Group I Mb
Equipment Marking:
Ex I M2
Ex db I Mb
Ex eb I Mb


CESI 18 ATEX 039 X
IECEx CES 18.0041X


The Cable Gland Type 07-9430-51 are suitable for inserting circular cables into Ex db enclosures with threaded entries and Ex eb or Ex tb enclosures having either threaded or plane entries. They are suitable for use in Zone 1, 2 for gas groups IIA, IIB and IIC and for use in Zone 21 and 22 for dust groups IIIA, IIIB and IIIC. The glands are fastened to the enclosure via the external thread section on the gland outer body. An elastomeric inner sealing ring is used in each gland type to facilitate sealing between the cable and the gland body and to clamp the cable so that no tensile or torsional forces are transmitted to the conductor connections. IP66/68 protection (50 m for 30 minutes) is maintained when the glands are installed according to the operating instructions.

Technical data *

Technical data *
Protection class IP 68 – 5 bar, 30 min, IP 66
Material Body, Cap/Inner Part:
Brass nickel plated, stainless steel,
CR (Chloroprene), Silicone
Temperature range Seal Material CR (Chloroprene):
Standard -40 °C to +80 °C
Seal Material Silicone:
Standard -60 °C to +80 °C

*Refer to the documentation for more detailed information


Data Sheet - Ex d/e Gland for Mining

Operating Instructions - Universal Ex d/e Gland