Barrier Cable Glands

for Non-armoured Cables, Barrier sealing



  • Specially designed for all types of non-armoured cables
  • Barrier seal for perfect sealing
  • High quality strain relief on cables
  • For Group II & III – Ex-d/e
  • Easy assembly


Ex II 2GD Ex db IIC Gb
Ex II 2GD Ex eb IIC Gb
Ex II 2GD Ex tb IIIC Db
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db
Suitable for use in
Group II, Gas Group IIC, Zone 1/Zone 2
Group III, Dust Group IIIC, Zone 21/Zone 22
Equipment Marking
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db


CESI 19 ATEX 022 X
IECEx CES 19.0009X


The Barrier glands type 07-9431-3** are suitable for inserting single or multiple non armoured circular cables into Ex db enclosures with threaded entries and Ex eb or Ex tb enclosures having either threaded or plane entries. Attachment of the glands to an enclosure is by means of the male threaded portion on the male body. The epoxy filling compound (epoxy putty) is used to seal cores and gland body together and to clamp the cables to prevent pulling or twisting forces being transmitted to the conductors’ connections. IP66/68 protection (50 m for 30 minutes) is maintained when the glands are installed according to the operating instructions.

Technical data *

Protection class IP 68 – 5 bar, 30 min, IP 66
Material Body, Cap/Inner Part:
Brass nickel plated, stainless steel,
CR (Chloroprene), Silicone
Operating temprature range Seal Material Silicone:
Standard -60 °C to +100 °C

*Refer to the documentation for more detailed information


Data Sheet - Barrier Cable Glands

Operational Instruction