Universal Ex d/e Gland

Features

• Specially designed for all types of armoured cables
• Grounding continuity are ensured through the armour/braid wire clamping arrangement
• High quality strain relief on cables
• Double compression: under cable armour and on the cable jacket (inner and outer sealing)
• Easy assembly

Marking

ATEX:
 II 2GD Ex db IIC Gb
 II 2GD Ex eb IIC Gb
 II 2GD Ex tb IIIC Db
IECEx:
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db
Suitable for use in:
Group II, Gas Group IIC, Zone 1/Zone 2
Group III, Dust Group IIIC, Zone 21/Zone 22
Equipment Marking
Ex II 2GD
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db

Description

The universal cable glands type 07-9430-32 and 07-9430-32****T (low temperature) are suitable for inserting circular cables into Ex db enclosures with threaded entries and Ex eb or Ex tb enclosures having either threaded or plane entries. They are suitable for use in Zone 1, 2 for gas groups IIA, IIB and IIC and for use in Zone 21 and 22 for dust groups IIIA, IIIB and IIIC. The glands are fastened to the enclosure via the external thread section on the gland outer body. An elastomeric inner sealing ring is used in each gland type to facilitate sealing between the cable and the gland body and to clamp the cable so that no tensile or torsional forces are transmitted to the conductor connections. IP66/68 protection (50 m for 30 minutes) is maintained when the glands are installed according to the operating instructions.

Technical data *

*Refer to the documentation for more detailed information