Offshore Ex d/e Gland

SWB - STA - Shielded, Double compression



  • Specially designed for steel wire armoured, steel wire braid as well as shielded cables
  • Grounding continuity are ensured through the armour/braid wire clamping
  • High quality strain relief on cables
  • Double compression: under cable armour and on the cable jacket (inner and outer sealing)
  • Easy assembly


Ex II 2GD Ex db IIC Gb
Ex II 2GD Ex eb IIC Gb
Ex II 2GD Ex tb IIIC Db
Ex db I Mb
Ex db eb I Mb
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db
Suitable of use in:
Group II, Gas Group IIC, Zone 1/Zone 2
Group III, Dust Group IIIC, Zone 21/Zone 22
Equipment Marking
Ex db IIC Gb
Ex eb IIC Gb
Ex tb IIIC Db


CESI 18 ATEX 039 X
IECEx CES 18.0041X


The offshore cable glands type 07-9430-22 and 07-9430-22****T (low temperature) are suitable for inserting circular cables into Ex db enclosures with threaded entries and Ex eb or Ex tb enclosures having either threaded or plane entries. They are suitable for use in Zone 1, 2 for gas groups IIA, IIB and IIC and for use in Zone 21 and 22 for dust groups IIIA, IIIB and IIIC. The glands are fastened to the enclosure via the external thread section on the gland outer body. An elastomeric inner sealing ring is used in each gland type to facilitate sealing between the cable and the gland body and to clamp the cable so that no tensile or torsional forces are transmitted to the conductor connections. IP66/68 protection (50 m for 30 minutes) is maintained when the glands are installed according to the operating instructions.

Technical data *

Protection class IP 68 – 5 bar, 30 min, IP 66
Material Body, Cap/Inner Part:
Brass nickel plated, stainless steel,
CR (Chloroprene), Silicone
Temperature range Seal Material CR (Chloroprene):
Standard -40 °C to +100 °C
T Type -40 °C to + 80 °C
Standard -60 °C to +130 °C
T Type -60 °C to + 80 °C

*Refer to the documentation for more detailed information


Data Sheet - Offshore Ex d/e Gland

Operating Instructions - Universal Ex d/e Gland