Bushings and cable entries pressure and vacuum sealed

non explosion-proof

Features

  • Economical, due to high packing density
  • Space-saving, due to internal thread
  • Fast installation with the small flange versions
  • Corrosion-resistant due to high-quality sleeve material
  • Bushing stems with suitable thermo material to ensure unimpaired signals from thermal sensors

Ambient temperature

-70 °C up to +150 °C


Description

Cable entries
Electrical cable entries are components which facilitate the insertion of electric leads into enclosures while providing a secure seal at the point of entry.

Line bushings
The line bushings allow an electrical connection of apparatus in enclosures or the connection of two enclosures.

The standard versions are suitable for the application range of 10-6 mbar to 63 bar positive pressure depending on the ambient temperature. Depending on the pressure and the medium to be sealed, the bushing / cable entry can be designed for a temperature range of -70 °C to +150 °C.

Versions up to 1000 bar are available to suit the temperature at the point of cable entry or bushing and the type of the medium to be sealed. BARTEC cable entries and line bushings in the IP 68 type of protection not only seal the cable sheath, they also protect the inside strands. BARTEC cable entries and line bushings consist in principle of a sleeve into which electric leads and single conductors are embedded in casting resin. Even the standard version of this component series satisfies most of the sealing requirements of modern process technologies.


Technical data *

Protection class IP 65 to IP 68
Material nickel-plated brass
stainless steel 1.4305 or 1.4571, Steel nickel-plated
Pressure up to 200 bar (Vakuum 10-6 mbar)

*Refer to the documentation for more detailed information


Documentation

Data Sheet - Bushings and cable entries pressure and vacuum sealed

Customer requirements - Cable entries/line bushings

Меню