Bushing conductor studs, pressure and vacuum tight

37-9119-A019/70E.

Ambient temperature

-70 °C up to +150 °C

Description

Industrial processes often take place within closed containers, under increased pressure or even vacuum conditions. It is therefore of utmost importance that no media leakages or pressure/vacuum drops occur when electrical power or signals are led through the container wall. Our BARTEC pressure and vacuum sealed stud-type bushings provide a simple and cost-effective solution to this problem. The stud-type bushings essentially consist of a threaded metal sleeve and the stud forming one block by means of a creepage-proof insulation material. The electrical connection can be made by the user himself with conventional connection systems. The seals can withstand pressures from 10 mbar abs. to 63 bar depending on the type used for the installation. Depending on their field of application, BARTEC pressure and vacuum sealed stud-type bushings can be used at temperatures of -70 °C to +150 °C. Our BARTEC stud-type bushings can also be used under conditions that differ from the basic technical data listed below.

Dimensions	see data sheet
Pressure	Nominal pressure: up to 63 bar (at RT = +25 °C) Test pressure: 80 bar at RT
Installation	Stud thread M3 to M30
Voltage	Nominal voltage: up to 1000 V
Current	100 A, 250 A, 315 A (see data sheet)

Bushing conductor studs, pressure and vacuum tight

Ambient temperature

Description

Technical data *

Documentation

Products