Remote I/O Module ANTARES 4TI

17-6143-1003/0000

Features

  • 4 channels temperature in
  • Pt100, Pt1000 or restistor
    up to 10 kOhm
  • 2-, 3-, 4-conductor technology
  • Integrated bus rail
  • Installation in ATEX Zone 1/2
    or Zone 21/22
  • Hot-Swap
  • Galvanic isolation between the inputs and the system
  • Line break/short-circuit monitoring
  • Plug-in and codable spring clamps

Marking

Ex II 2(1)G Ex ib [ia IIC/IIB Ga] IIC T4 Gb
Ex II (1)D [Ex ia Da] IIIC
Ex ib [ia IIC/IIB Ga] IIC T4 Gb
[Ex ia Da] IIIC
Class I, Zone 1

Ambient temperature

-20 °C up to +60 °C

Certification

PTB 11 ATEX 2016
IECEx PTB 11.0058
DNV A-13339
TC RU C-DE.BH02.B.00005
KCS KTL 13-KB4BO-0308
KCS KTL 13-KB4BO-0309
UL BR 13.0269

Description

The ANTARES 4TI Remote I/O Module is operated and supplied with power by means of the Rail Control Unit (RCU) ANTARES. This module allows the intrinsically safe connection of 4 Pt100, Pt1000, resistors or potentiometers. The hotswap capability allows the electronic unit to be replaced without disconnecting from voltage even in an explosive atmosphere. The internal and galvanically isolated bus connection is established by simply plugging the modules to the RCU. A bus rail is not necessary. Open circuit/short circuit monitoring can be programmed for each channel. The bus status messages and individual messages per channel are displayed by the LEDs. This also enables diagnostics on the module. The Software ANTARES Designer allows parameters to be set for the sensor type. See the system description for installation instructions.


Technical data *

Protection class (EN 60529)
Enclosure: IP 30 in the ANTARES system construction
Dimensions (W x H x D) 45 mm x 110 mm x 114.5 mm
Material Enclosure material: PA
Installation Mounting rail TH 35-15 DIN EN 60715 (steel, galvanised)
Storage temperature -25 °C up to +85 °C
Humidity 5 up to 95 %, non-condensing
Vibration (EN 60068-2-6)
2 g/7 mm; 5 Hz up to 200 Hz in all 3 axes
Shock resistance (EN 60068-2-27)
15 g/11 ms, ± 3 shocks per direction
Weight approx. 380 g
Measurement range Potentiometer 0 up to 10 kΩ
Temperature -200 °C up to +850 °C
Display LEDs in enclosure front:
Status PWR, ST, ERR1, ERR2
Inputs 1 x LED error per Channel
Interface Number of channels
4 inputs Ex i (short-circuit-proof)
Voltage Supply voltage: through internal bus
Connection plug-in tension spring-loaded clamps,
4-pole up to 2.5 mm²
optional coding and numbering

*Refer to the documentation for more detailed information


Documentation

Data Sheet - Remote I/O Module ANTARES 4TI

Declaration of Conformity 11-6143-7C0003

Меню